Xiaomi Black Global Version Mi Wi-Fi Range Extender Pro 300M 2.4G Repeater
Note: This is Global Version, with original EU standard Plug. Mi Wi-Fi Range Extender Product Model R03 Dimensions: 80 x 54 x 70 mm CPU: MT7628K 580 MHz ROM 2 MB RAM 8 MB Antenna Type: 2 external antennas Wireless Standards IEEE 802.11b/g/n Signal Rate 2.4 GHz, up to 300 Mbps Wireless Security WPA-PSK/ WPA2-PSK encryption Power Supply 100-240 V/0.35 A Operating environment Operating temperature 0-40°C Operating humidity 10%-90%RH (non-condensing) Storage temperature -40-70°C Storage humidity 5%-90%RH (non-condensing) Power consumption 3.57W Package contents Mi Wi-Fi Range Extender Pro user manual Easy Wi-Fi extension Tired of Wi-Fi “dead zone”? Mi Wi-Fi Range Extender Pro can help you easily connect to the network. 1、Put the extender near the router, turn the power on and wait for the yellow indicator light to start flashing. 2、Scan the QR code to install the app and follow the instructions to add the device. 3、When the indicator light turns blue, pairing is complete. Now you can simply unplug and plug the Mi Wi-Fi Range Extender Pro in a location for the best signal quality and coverage in your house, without needing to configure the extender again FAQ Q1:What do the different colors of the indicator light mean? A: 1)The blue light is always on: the amplifier is running normally, and the WiFi pairing is successful. 2)The yellow light is always on: the amplifier is starting up, the process is very short, about 10 seconds. 3)Blinking blue: Waiting for pairing, pairing, or pairing failed.The pairing failed. The original network's WiFi password may be changed or it may be far from the original network. 4)Steady red light: The boot failed, please re-plug and try to repair. If the problem persists, please call after-sales service. Q2:Why The amplifier is always flashing orange, then the blue light is flashing? A:The initial setting was unsuccessful. After inserting the Xiaomi router USB, the pairing could not be completed. Please upgrade your router to the latest development or stable version (2.0 or above) Check if the amplifier has been paired. If it has been paired, please reset the amplifier to the factory settings (hold the reset hole with the card pin for 5 seconds), then re-pair The paired amplifier appears blue flashing Try plugging or unplugging the amplifier, or reset the amplifier (use the PIN pin to hold the reset hole for 5 seconds) before re-pairing Q3:How to customize the network name and password of the amplifier? A:Not supported yet, Q4:How to upgrade the firmware? A:When the amplifier is idle, it is found that the upgradeable version will automatically complete the upgrade; In addition, you can manually upgrade to the latest firmware through the Xiaomi routing client or Xiaomi smart home client. Q5:Why can't the amplifier get the signal from the router? A:Need to connect the router at close range, so that the amplifier can get a stable signal, at least two squares or more .
Out Of Stock
Price History:
Details:Out Of Stock
Xiaomi Black Global Version Mi Wi-Fi Range Extender Pro 300M 2.4G Repeater
Note: This is Global Version, with original EU standard Plug. Mi Wi-Fi Range Extender Product Model R03 Dimensions: 80 x 54 x 70 mm CPU: MT7628K 580 MHz ROM 2 MB RAM 8 MB Antenna Type: 2 external antennas Wireless Standards IEEE 802.11b/g/n Signal Rate 2.4 GHz, up to 300 Mbps Wireless Security WPA-PSK/ WPA2-PSK encryption Power Supply 100-240 V/0.35 A Operating environment Operating temperature 0-40°C Operating humidity 10%-90%RH (non-condensing) Storage temperature -40-70°C Storage humidity 5%-90%RH (non-condensing) Power consumption 3.57W Package contents Mi Wi-Fi Range Extender Pro user manual Easy Wi-Fi extension Tired of Wi-Fi “dead zone”? Mi Wi-Fi Range Extender Pro can help you easily connect to the network. 1、Put the extender near the router, turn the power on and wait for the yellow indicator light to start flashing. 2、Scan the QR code to install the app and follow the instructions to add the device. 3、When the indicator light turns blue, pairing is complete. Now you can simply unplug and plug the Mi Wi-Fi Range Extender Pro in a location for the best signal quality and coverage in your house, without needing to configure the extender again FAQ Q1:What do the different colors of the indicator light mean? A: 1)The blue light is always on: the amplifier is running normally, and the WiFi pairing is successful. 2)The yellow light is always on: the amplifier is starting up, the process is very short, about 10 seconds. 3)Blinking blue: Waiting for pairing, pairing, or pairing failed.The pairing failed. The original network's WiFi password may be changed or it may be far from the original network. 4)Steady red light: The boot failed, please re-plug and try to repair. If the problem persists, please call after-sales service. Q2:Why The amplifier is always flashing orange, then the blue light is flashing? A:The initial setting was unsuccessful. After inserting the Xiaomi router USB, the pairing could not be completed. Please upgrade your router to the latest development or stable version (2.0 or above) Check if the amplifier has been paired. If it has been paired, please reset the amplifier to the factory settings (hold the reset hole with the card pin for 5 seconds), then re-pair The paired amplifier appears blue flashing Try plugging or unplugging the amplifier, or reset the amplifier (use the PIN pin to hold the reset hole for 5 seconds) before re-pairing Q3:How to customize the network name and password of the amplifier? A:Not supported yet, Q4:How to upgrade the firmware? A:When the amplifier is idle, it is found that the upgradeable version will automatically complete the upgrade; In addition, you can manually upgrade to the latest firmware through the Xiaomi routing client or Xiaomi smart home client. Q5:Why can't the amplifier get the signal from the router? A:Need to connect the router at close range, so that the amplifier can get a stable signal, at least two squares or more .
Top Picks
Currently Unavailable
Joom UK
0.00% (~ £0.00)
£22.53
Joom UK
0.00% (~ £0.00)
£22.53
Joom UK
0.00% (~ 0,00 €)
24,61 €
Product Description
Note: This is Global Version, with original EU standard Plug. Mi Wi-Fi Range Extender Product Model R03 Dimensions: 80 x 54 x 70 mm CPU: MT7628K 580 MHz ROM 2 MB RAM 8 MB Antenna Type: 2 external antennas Wireless Standards IEEE 802.11b/g/n Signal Rate 2.4 GHz, up to 300 Mbps Wireless Security WPA-PSK/ WPA2-PSK encryption Power Supply 100-240 V/0.35 A Operating environment Operating temperature 0-40°C Operating humidity 10%-90%RH (non-condensing) Storage temperature -40-70°C Storage humidity 5%-90%RH (non-condensing) Power consumption 3.57W Package contents Mi Wi-Fi Range Extender Pro user manual Easy Wi-Fi extension Tired of Wi-Fi “dead zone”? Mi Wi-Fi Range Extender Pro can help you easily connect to the network. 1、Put the extender near the router, turn the power on and wait for the yellow indicator light to start flashing. 2、Scan the QR code to install the app and follow the instructions to add the device. 3、When the indicator light turns blue, pairing is complete. Now you can simply unplug and plug the Mi Wi-Fi Range Extender Pro in a location for the best signal quality and coverage in your house, without needing to configure the extender again FAQ Q1:What do the different colors of the indicator light mean? A: 1)The blue light is always on: the amplifier is running normally, and the WiFi pairing is successful. 2)The yellow light is always on: the amplifier is starting up, the process is very short, about 10 seconds. 3)Blinking blue: Waiting for pairing, pairing, or pairing failed.The pairing failed. The original network's WiFi password may be changed or it may be far from the original network. 4)Steady red light: The boot failed, please re-plug and try to repair. If the problem persists, please call after-sales service. Q2:Why The amplifier is always flashing orange, then the blue light is flashing? A:The initial setting was unsuccessful. After inserting the Xiaomi router USB, the pairing could not be completed. Please upgrade your router to the latest development or stable version (2.0 or above) Check if the amplifier has been paired. If it has been paired, please reset the amplifier to the factory settings (hold the reset hole with the card pin for 5 seconds), then re-pair The paired amplifier appears blue flashing Try plugging or unplugging the amplifier, or reset the amplifier (use the PIN pin to hold the reset hole for 5 seconds) before re-pairing Q3:How to customize the network name and password of the amplifier? A:Not supported yet, Q4:How to upgrade the firmware? A:When the amplifier is idle, it is found that the upgradeable version will automatically complete the upgrade; In addition, you can manually upgrade to the latest firmware through the Xiaomi routing client or Xiaomi smart home client. Q5:Why can't the amplifier get the signal from the router? A:Need to connect the router at close range, so that the amplifier can get a stable signal, at least two squares or more .
Product Specifications
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.