* HSS PoinTeQ tip enables faster drilling and more durability * Self centring tip gives quick accurate start Enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill Bit PointTeQ is manufactured to DIN 338. The drill bit is Type N (flute angle) with a tip of 135 degrees. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. The innovative PointTeQ tip design on this HSS metal drill bit always delivers big results. Enabling a faster drilling rate, it generates less heat and wear to help the tip stay sharper for longer. The bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. The self-centering tip prevents wandering, so you'll always be sure of a quick and easy drilling start.* Drill clearance and pilot holes in a range of metals* PointTeQ tip design enables faster drilling in metal* Increased drilling rate generates less heat and wear* Quick starts - self-centering tip prevents wandering* Black oxide-coated flute ensures fast chip removal* Type N flute angle with a 135deg tip* Low risk of breakage due to highly elastic body* Cylindrical shank compatible with three-jaw drill chucks* Manufactured to DIN 338 Bosch PointTeQ HSS Metal Drill Bit 6.0mm Steel