With the Alphacool Ice Station you get a compact reservoir that fits into almost any housing. Highlights - 1. The lid is made of highly sturdy nylon - 2. Variety of mounting options - 3. Lighted logo and LED mounting options The Alphacool ice station expansion tank is extremely compact which is geared for the desired DDC pump. The pump is installed in the floor of the ice station and is not visible from the outside (Pump not included). The bottom of the ice station consists of a metal plate which increases the stability of the ice station. Mounting options It is possible to screw the ice station on a 2.5 "mount for SSD hard drives. It is also possible to mount in a 3.5 "slot. The screw connection is carried out in both cases via the enclosed special decoupling screws. This minimizes the transmission of vibration to the enclosure and overall quieter operation. Another mounting option is an enclosed Velcro fastener. One part of the hook and loop fastener is simply glued to the bottom of the ice station while the other part is glued in the housing. Then the ice station only has to be pressed with the bottom onto the counterpart in the housing. The size of the Velcro ensures a secure position even during transport. The assembly can be done vertically and horizontally as desired and space. Connection Options One IN and OUT with G1 / 4 thread can be found on the head side with the illuminated logo. You can change the color of the logo with the optional modding kit. The lid has a G1 / 4 "and a G3 / 8" connection. The G3 / 8 "connection facilitates the filling of the ice station due to the larger diameter and can alternatively be used as a lighting module for 5 mm LEDs. Two additional 5 mm LED squares are also found in the floor and illuminate the water-filled part from below. A special highlight is the material choice of the ice station. The lower part is covered with a high-quality soft-touch surface which gives an outstanding feel and look. The upper part and actual reservoir is not made of simple and fast breaking Plexiglas but made of extremely sturdy nylon. While normal reservoirs made of glass or Plexiglas can break or break even at small fall heights or improper handling it is almost impossible to destroy the transparent container of the ice station. Technical Specifications - Dimensions (LxWxH): 102 x 82 x 89mm - Capacity: 250ml - Material: Nylon / PMMA - In / Out: G1 / 4 " - Connection options: 3x G1 / 4 "/ 1x G3 / 8" - Power LED logo: 3 pin - Lighting modules: 4x for 5mm LED Content: - 1x Alphacool ice station DDC - Solo reservoir - 1x Metal floor - Mounting screws - 4x Decoupling screws - Self-adhesive Velcro mat
Price now:
From
to
Price History:
Details:With the Alphacool Ice Station you get a compact reservoir that fits into almost any housing. Highlights - 1. The lid is made of highly sturdy nylon - 2. Variety of mounting options - 3. Lighted logo and LED mounting options The Alphacool ice station expansion tank is extremely compact which is geared for the desired DDC pump. The pump is installed in the floor of the ice station and is not visible from the outside (Pump not included). The bottom of the ice station consists of a metal plate which increases the stability of the ice station. Mounting options It is possible to screw the ice station on a 2.5 "mount for SSD hard drives. It is also possible to mount in a 3.5 "slot. The screw connection is carried out in both cases via the enclosed special decoupling screws. This minimizes the transmission of vibration to the enclosure and overall quieter operation. Another mounting option is an enclosed Velcro fastener. One part of the hook and loop fastener is simply glued to the bottom of the ice station while the other part is glued in the housing. Then the ice station only has to be pressed with the bottom onto the counterpart in the housing. The size of the Velcro ensures a secure position even during transport. The assembly can be done vertically and horizontally as desired and space. Connection Options One IN and OUT with G1 / 4 thread can be found on the head side with the illuminated logo. You can change the color of the logo with the optional modding kit. The lid has a G1 / 4 "and a G3 / 8" connection. The G3 / 8 "connection facilitates the filling of the ice station due to the larger diameter and can alternatively be used as a lighting module for 5 mm LEDs. Two additional 5 mm LED squares are also found in the floor and illuminate the water-filled part from below. A special highlight is the material choice of the ice station. The lower part is covered with a high-quality soft-touch surface which gives an outstanding feel and look. The upper part and actual reservoir is not made of simple and fast breaking Plexiglas but made of extremely sturdy nylon. While normal reservoirs made of glass or Plexiglas can break or break even at small fall heights or improper handling it is almost impossible to destroy the transparent container of the ice station. Technical Specifications - Dimensions (LxWxH): 102 x 82 x 89mm - Capacity: 250ml - Material: Nylon / PMMA - In / Out: G1 / 4 " - Connection options: 3x G1 / 4 "/ 1x G3 / 8" - Power LED logo: 3 pin - Lighting modules: 4x for 5mm LED Content: - 1x Alphacool ice station DDC - Solo reservoir - 1x Metal floor - Mounting screws - 4x Decoupling screws - Self-adhesive Velcro mat
Price now:
From
to
Currys
0.00% (~ ÂŁ0.00)
ÂŁ38.40
With the Alphacool Ice Station you get a compact reservoir that fits into almost any housing. Highlights - 1. The lid is made of highly sturdy nylon - 2. Variety of mounting options - 3. Lighted logo and LED mounting options The Alphacool ice station expansion tank is extremely compact which is geared for the desired DDC pump. The pump is installed in the floor of the ice station and is not visible from the outside (Pump not included). The bottom of the ice station consists of a metal plate which increases the stability of the ice station. Mounting options It is possible to screw the ice station on a 2.5 "mount for SSD hard drives. It is also possible to mount in a 3.5 "slot. The screw connection is carried out in both cases via the enclosed special decoupling screws. This minimizes the transmission of vibration to the enclosure and overall quieter operation. Another mounting option is an enclosed Velcro fastener. One part of the hook and loop fastener is simply glued to the bottom of the ice station while the other part is glued in the housing. Then the ice station only has to be pressed with the bottom onto the counterpart in the housing. The size of the Velcro ensures a secure position even during transport. The assembly can be done vertically and horizontally as desired and space. Connection Options One IN and OUT with G1 / 4 thread can be found on the head side with the illuminated logo. You can change the color of the logo with the optional modding kit. The lid has a G1 / 4 "and a G3 / 8" connection. The G3 / 8 "connection facilitates the filling of the ice station due to the larger diameter and can alternatively be used as a lighting module for 5 mm LEDs. Two additional 5 mm LED squares are also found in the floor and illuminate the water-filled part from below. A special highlight is the material choice of the ice station. The lower part is covered with a high-quality soft-touch surface which gives an outstanding feel and look. The upper part and actual reservoir is not made of simple and fast breaking Plexiglas but made of extremely sturdy nylon. While normal reservoirs made of glass or Plexiglas can break or break even at small fall heights or improper handling it is almost impossible to destroy the transparent container of the ice station. Technical Specifications - Dimensions (LxWxH): 102 x 82 x 89mm - Capacity: 250ml - Material: Nylon / PMMA - In / Out: G1 / 4 " - Connection options: 3x G1 / 4 "/ 1x G3 / 8" - Power LED logo: 3 pin - Lighting modules: 4x for 5mm LED Content: - 1x Alphacool ice station DDC - Solo reservoir - 1x Metal floor - Mounting screws - 4x Decoupling screws - Self-adhesive Velcro mat
General | |
---|---|
Material | nylon/metal |
Size | Extra Small |
Brand | Alphacool |
Sellers offer a range of delivery options, so you can choose the one thatâs most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a sellerâs listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.