Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required Nude Microlinear stylus and boron cantilever provide lower distortion and high transient response A neodymium magnet and a premium permendur yoke with high saturation flux density and outstanding magnetic properties further enhance the concentrated magnetic field of the coil gap Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer included components: Cartridge, screwdriver, 2 washers, cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2), plastic protector, brush