This listing is for 2 Speakers Cables1 Pair20 Metre SpeakON CableMale To Male2 Pole Configuration ColourBlack Cable and Blue/Grey ConnectorsTechnical Spec;2 x 1.5mm Conductors7mm Outer diameter CableNeutrik Branded NL2FC Connectors 2 PoleLow-noise, highly flexible cableOverviewSpecially designed for high current amp to speaker applications, SpeakON cables have become an industry standard due to their high quality construction, and their exceptional performance in demanding P.A. or live situations.CompatibilityMost power amps that have SpeakON outputs use the 4-Pole female connector. If you wish to connect a standard 2-Pole cable, to use as a regular speaker cable, it will work fine, the 2 unused poles on the female connector will simply lay dormant until needed. This cable uses 2-Pole connectors, which carry a single pair of positive and negative contacts. It can be used as a standard speaker cable-to connect an amp to a speaker, or to branch off from a multi-speaker setup, however care must be taken when doing this, please read the 'further info' section below. FeaturesIn addition to using low noise highly flexible cable, they feature branded Neutrik NL2FC connectors* that include a number of useful features, unique to SpeakON. They lock into the jack with a quarter-twist, and include cable strain relief to prevent damage in the event of a sudden yank. They also have no exposed current-carrying components, making them safe to handle while live, with no risk of electric shock. They also do not short out during connection and disconnection, making them ideal for live, multi-speaker applications, in case of partial failure, speakers can be removed and replaced without risk of damage to other connected equipment. Since interchanging connectors are a main feature of the SpeakON system, the connectors can be removed and replaced with no soldering, the core wires are simply clamped into place with a small screw. Further infoThe additional poles on some SpeakON connectors also allow speakers to be Daisy Chained or alternatively standard cable like this could be used from the output on your current speaker to a second speaker.On a multi-pole connector, a second cable can be wired to the unused contacts, allowing another speaker to be chained on to the first, powered by the same amp, without the need to run a separate cable from it. The number of speakers that can be Daisy-Chained together depends on the impedance of your amplifier. Usually no more than 2 speakers can be chained, as most amps are rated at 4-8 ohms. Depending on the resistance of your speakers, if more than 2 are connected, it could cause the resistance to drop below 4 ohms potentially damaging your amp. Further infoBi-AmpingSpeakONs multi-pole design (not present on this cable) was created with Multi-Amping in mind, allowing users to use a collection of different amps (or one amp that can output in a bi-amp format) to drive a collection of speakers. Certain amps are dedicated to reproducing particular frequencies exceptionally well; there are dedicated bass amps, and those that focus on high frequency sound, likewise with speakers. If you are unsure what cable you require, please feel free to give us a call and we'll be happy to help. *Since the appearance of numerous counterfeit SpeakON connectors online, inventors Neutrik advised consumers that these bogus connectors do not include their patented safety features. Rest assured these are official Neutrik branded connectors.
Price now:
From
to
Price History:
Details:This listing is for 2 Speakers Cables1 Pair20 Metre SpeakON CableMale To Male2 Pole Configuration ColourBlack Cable and Blue/Grey ConnectorsTechnical Spec;2 x 1.5mm Conductors7mm Outer diameter CableNeutrik Branded NL2FC Connectors 2 PoleLow-noise, highly flexible cableOverviewSpecially designed for high current amp to speaker applications, SpeakON cables have become an industry standard due to their high quality construction, and their exceptional performance in demanding P.A. or live situations.CompatibilityMost power amps that have SpeakON outputs use the 4-Pole female connector. If you wish to connect a standard 2-Pole cable, to use as a regular speaker cable, it will work fine, the 2 unused poles on the female connector will simply lay dormant until needed. This cable uses 2-Pole connectors, which carry a single pair of positive and negative contacts. It can be used as a standard speaker cable-to connect an amp to a speaker, or to branch off from a multi-speaker setup, however care must be taken when doing this, please read the 'further info' section below. FeaturesIn addition to using low noise highly flexible cable, they feature branded Neutrik NL2FC connectors* that include a number of useful features, unique to SpeakON. They lock into the jack with a quarter-twist, and include cable strain relief to prevent damage in the event of a sudden yank. They also have no exposed current-carrying components, making them safe to handle while live, with no risk of electric shock. They also do not short out during connection and disconnection, making them ideal for live, multi-speaker applications, in case of partial failure, speakers can be removed and replaced without risk of damage to other connected equipment. Since interchanging connectors are a main feature of the SpeakON system, the connectors can be removed and replaced with no soldering, the core wires are simply clamped into place with a small screw. Further infoThe additional poles on some SpeakON connectors also allow speakers to be Daisy Chained or alternatively standard cable like this could be used from the output on your current speaker to a second speaker.On a multi-pole connector, a second cable can be wired to the unused contacts, allowing another speaker to be chained on to the first, powered by the same amp, without the need to run a separate cable from it. The number of speakers that can be Daisy-Chained together depends on the impedance of your amplifier. Usually no more than 2 speakers can be chained, as most amps are rated at 4-8 ohms. Depending on the resistance of your speakers, if more than 2 are connected, it could cause the resistance to drop below 4 ohms potentially damaging your amp. Further infoBi-AmpingSpeakONs multi-pole design (not present on this cable) was created with Multi-Amping in mind, allowing users to use a collection of different amps (or one amp that can output in a bi-amp format) to drive a collection of speakers. Certain amps are dedicated to reproducing particular frequencies exceptionally well; there are dedicated bass amps, and those that focus on high frequency sound, likewise with speakers. If you are unsure what cable you require, please feel free to give us a call and we'll be happy to help. *Since the appearance of numerous counterfeit SpeakON connectors online, inventors Neutrik advised consumers that these bogus connectors do not include their patented safety features. Rest assured these are official Neutrik branded connectors.
Price now:
From
to
B&Q
17.65% (+ £15.75)
New
£104.99
Debenhams
0.00% (~ £0.00)
New
£110.24
This listing is for 2 Speakers Cables1 Pair20 Metre SpeakON CableMale To Male2 Pole Configuration ColourBlack Cable and Blue/Grey ConnectorsTechnical Spec;2 x 1.5mm Conductors7mm Outer diameter CableNeutrik Branded NL2FC Connectors 2 PoleLow-noise, highly flexible cableOverviewSpecially designed for high current amp to speaker applications, SpeakON cables have become an industry standard due to their high quality construction, and their exceptional performance in demanding P.A. or live situations.CompatibilityMost power amps that have SpeakON outputs use the 4-Pole female connector. If you wish to connect a standard 2-Pole cable, to use as a regular speaker cable, it will work fine, the 2 unused poles on the female connector will simply lay dormant until needed. This cable uses 2-Pole connectors, which carry a single pair of positive and negative contacts. It can be used as a standard speaker cable-to connect an amp to a speaker, or to branch off from a multi-speaker setup, however care must be taken when doing this, please read the 'further info' section below. FeaturesIn addition to using low noise highly flexible cable, they feature branded Neutrik NL2FC connectors* that include a number of useful features, unique to SpeakON. They lock into the jack with a quarter-twist, and include cable strain relief to prevent damage in the event of a sudden yank. They also have no exposed current-carrying components, making them safe to handle while live, with no risk of electric shock. They also do not short out during connection and disconnection, making them ideal for live, multi-speaker applications, in case of partial failure, speakers can be removed and replaced without risk of damage to other connected equipment. Since interchanging connectors are a main feature of the SpeakON system, the connectors can be removed and replaced with no soldering, the core wires are simply clamped into place with a small screw. Further infoThe additional poles on some SpeakON connectors also allow speakers to be Daisy Chained or alternatively standard cable like this could be used from the output on your current speaker to a second speaker.On a multi-pole connector, a second cable can be wired to the unused contacts, allowing another speaker to be chained on to the first, powered by the same amp, without the need to run a separate cable from it. The number of speakers that can be Daisy-Chained together depends on the impedance of your amplifier. Usually no more than 2 speakers can be chained, as most amps are rated at 4-8 ohms. Depending on the resistance of your speakers, if more than 2 are connected, it could cause the resistance to drop below 4 ohms potentially damaging your amp. Further infoBi-AmpingSpeakONs multi-pole design (not present on this cable) was created with Multi-Amping in mind, allowing users to use a collection of different amps (or one amp that can output in a bi-amp format) to drive a collection of speakers. Certain amps are dedicated to reproducing particular frequencies exceptionally well; there are dedicated bass amps, and those that focus on high frequency sound, likewise with speakers. If you are unsure what cable you require, please feel free to give us a call and we'll be happy to help. *Since the appearance of numerous counterfeit SpeakON connectors online, inventors Neutrik advised consumers that these bogus connectors do not include their patented safety features. Rest assured these are official Neutrik branded connectors.
General | |
---|---|
Size | 20m |
Gender | male |
Brand | B&Q |
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.